Complete Guide to Charging the Jabra Enhance Pro 10 Hearing Aids

Keeping Your Jabra Enhance Pro 10 Charged and Powered Up

The Jabra Enhance Pro 10 rechargeable hearing aids offer high-quality sound amplification and Bluetooth connectivity in a discreet device. Like all rechargeable electronics, keeping your Jabra Enhance Pro 10 charged and powered up is essential for continuous all-day use.

Understanding the Jabra Enhance Pro 10 Battery

The Jabra Enhance Pro 10 uses a built-in lithium-ion battery to enable its rechargeable function. Key facts about the battery include:

• Up to 30 hours runtime per full charge
• Takes up to 3 hours to complete a full charge
• Fast charging option - 30 mins charging = up to 5 hours use
• On average, the battery lasts 12-18 months with regular charging

Monitoring your battery level and promptly recharging when low are important to ensure you don’t lose power at inconvenient times throughout your day.

Charging Your Jabra Enhance Pro 10

To charge your Jabra Enhance Pro 10 hearing aids:

1. Insert each hearing aid into its slot in the charging case and close the lid.
2. Plug the supplied USB charging cable into the case.
3. Plug the other end into a power source like a wall adapter or computer.
4. The case LED light turns yellow to indicate charging has started.
5. Charging is complete when the LED light turns green. Total time is up to 3 hours.

Be sure to fully charge newly purchased hearing aids before first use. Store them in the charging case when not being worn to keep the battery topped up.

Tips for Fast Charging

If you’re in a time crunch, here are tips for fast charging your Jabra Enhance Pro 10:

• Use the wall plug USB adapter for fastest charging.
• Power off hearing aids when charging to speed up the process.
• Charge in a room temperature environment; extreme cold/heat slows charging.
• Don't interrupt the charge cycle. Charging pauses if you open the case.
• Only fast charge occasionally to prolong long-term battery health.

Monitoring Battery Level

It’s important to monitor your Jabra Enhance Pro 10 battery level so you don’t end up with dead hearing aids in the middle of your day. There are two ways to check battery level:

• Jabra Sound+ App - Connect hearing aids to app to view real-time battery percentage remaining.
• Case LEDs - LEDs in the charging case indicate battery level when devices are inserted.

Recharge anytime battery falls below 20% to maintain continuous power. Carry the compact charging case with you when on-the-go.

Charging Case for Jabra Enhance Pro 10

Your Jabra Enhance Pro 10 comes with a compact charging case to recharge the devices. Here’s an overview of the key features and functions of the charging case:

Case Design

• Slim, sleek clamshell case with flip top lid
• Fits easily into pocket or bag
• Hinged design securely holds hearing aids in place
• Contains built-in rechargeable battery
• Crafted from durable plastic in dark gray
• Includes mesh drying rack for aids when wet

Charging Capability

• Recharges hearing aid battery from 0 to 100% in 3 hours
• Provides up to 3 full hearing aid charges per case charge
• Case holds charge for up to 1 week when not in use
• Case recharges via included USB-C cable
• Can also charge case using any Qi-compatible wireless pad

Battery Monitoring

• Case LEDs indicate battery level of both hearing aids and case itself
• Jabra Sound+ app shows exact percentage of battery remaining
• Alerts user when battery running low via app notification

Added Convenience

• Doubles as secure storage and carrying case
• Keeps hearing aids powered up whenever not in use
• No more changing tiny batteries!
• Can charge case on the go from portable battery pack

Overall, the included Jabra charging case delivers a compact yet powerful solution for keeping your Jabra Enhance Pro 10 powered around the clock.

Jabra Enhance Pro 10 Battery Care Tips

To promote maximum battery life and performance, follow these battery care guidelines:

Avoid Heat Exposure

Don't leave charging case or hearing aids in hot environments like direct sunlight or a hot parked vehicle. Heat degrades the battery.

Store in Charging Case

Return aids to the charging case after each use. This keeps battery topped off and protected.

Fully Charge Regularly

Allow hearing aids to fully charge in case before using. Partial charges slowly diminish capacity over time.

Avoid Full Discharges

Don't allow battery to completely drain to 0% if avoidable. This strains the battery.

Use Proper Power Adapters

Only use the USB adapter included or other adapters rated for your Jabra device. Incorrect adapters can damage the battery.

Unplug When Fully Charged

As soon as charging is complete, unplug the charging case. Don't overcharge the battery.

Keep Contacts Clean

Use included brush to periodically clean charging contacts on hearing aids and inside case.

Avoid Excessive Heat or Cold

Don't charge battery when ambient temperature is above 35°C (95°F) or below 5°C (41°F).

Periodically Deplete and Recharge

Once a month, fully drain then recharge battery to calibrate it and extend lifespan.

Jabra Enhance Pro 10 Battery Replacement

With repeated charging and use, the Jabra Enhance Pro 10 rechargeable battery will eventually need replacement. Here’s what to expect:

• Battery lifespan averages 12-18 months with regular use.
• Gradual shortened usage time indicates aging battery needing replacement.
• Contact Jabra support to arrange professional battery replacement.
• Replacement expected every 1-2 years to maintain performance.
• Changing battery restores runtime back to normal 30 hours.
• User should not attempt to replace battery themselves due to risk of damage.
• Battery replacement cost around $50 per hearing aid from Jabra.

Properly caring for your Jabra Enhance Pro 10 battery maximizes its operational lifespan. But occasional replacement is inevitable. Contact Jabra promptly once a degraded battery is suspected for fast professional replacement service.

Troubleshooting Jabra Enhance Pro 10 Charging

In rare instances, technical issues may arise when attempting to charge your Jabra Enhance Pro 10 devices. Here are some troubleshooting tips for common charging problems:

Hearing Aids Won't Power On

• Ensure hearing aid battery is charged and not fully depleted.
• Clean charging contacts on hearing aid and in charging case.
• Check that hearing aid is inserted properly into charging slot.
• Inspect USB cable for damage; try different cable if available.

Case Won't Power On

• Try pressing case power button for 3+ seconds to force reboot.
• Inspect USB charging cable for damage and replace if needed.
• Use alternate wall adapter/power source to charge case.
• Contact Jabra support if unresolved; case may need servicing.

Case LED Not Lighting Up

• Check that USB charging cable is fully inserted into case.
• Try alternative USB power source if issue persists.
• LEDs may need replacement; contact Jabra support for assistance.

Charging Takes Longer than Normal

• Older batteries charge slower. Replace battery if over 18 months old.
• Extreme cold environments can delay charging time.
• Inspect USB adapter and cable; swap for new ones if defective.
• Overused batteries may need professional replacement from Jabra.

For any persistent charging issues, reach out to Jabra support for troubleshooting advice or repair arrangements. Don't attempt to service components yourself to avoid damaging devices.

Keep Your Jabra Enhance Pro 10 Powered Up

Like any rechargeable device, the key is properly charging your Jabra Enhance Pro 10 hearing aids and monitoring battery level. Storing aids in the charging case when not in use ensures continuous power. Periodic battery replacement maintains good performance over years of use. Follow Jabra charging guidelines and troubleshoot any issues promptly to enjoy seamless hearing enhancement.

Disclaimer: This article is for informational purposes only and does not constitute medical advice. Always consult with a healthcare professional before starting any new treatment regimen.